Jinjiang City Huayao Printing & Art Co., Ltd.
Main products:Heat Transfer,PET Film,Sublimation
Contact Us
  • Contact Person : Ms. Fan Trina
  • Company Name : Jinjiang City Huayao Printing & Art Co., Ltd.
  • Tel : 86-595-88075522
  • Fax : 86-595-88075523
  • Address : Fujian,jinjiang city,hukeng Section,wuli industrial districts,Yonghe Town,Jinjiang City,Fujian province,China
  • Country/Region : China
  • Zip : 362235

silicone rubber heat transfer

silicone rubber heat transfer
Product Detailed
1.Raise Rubber heat transfer 2.3D hand feel 3.Thickness from 0.4mm to1.0mm 4.DTM color/ Metallic/ Foil/ Neon colors avaible

Special on Reflective and Raise Rubber heat transfer:

Color:Any Color (DTM color/ Metallic/ Foil/ Neon colors)
Max. size:200 x 200mm
Country of OriginChina

-3D hand feel-Thickness from 0.6mm to 1.0mm-DTM color/ Metallic/ Foil/ Neon colors are available -Environmental friendly  

Testing or Certificates:-Passed Washing and CHemical tests in US /EU standard

Application Conditions for Raise Rubber heat Transfer:

Method:Heat transfer
Transfer Temperature:160°C
Transfer Time:

 1st Press - 5 Sec, 2nd Press – 18 - 20 Sec

Transfer Pressure:0.2 Mpa / 200gf/cm2 (Light)
Peeling Way:Cool
Suggest Silicone Pad size40cm x 50cm

**Please provide bulk fabric for us to test the accurate application**

Procedures for Raise Rubber heat Transfer:

1. Place the transfer on the correct position

2. 1st Press: Applied heat for 5 seconds on the face side then place a release paper on top to cover the whole garment from heat 

3. Reverse the garment (garment facing down)

4. 2nd Press: Apply heat for 18 – 20 seconds using light pressure

5. Let motif completely cool down before peeling off backing film

Recommended wash care symbol:

- Machine Wash, Cold (initial water temperature should not exceed 30C or 65 to 85F)

- Tumble Dry, Normal, Low Heat (A machine dryer may be regularly used at a maximum of Low Heat setting)

- Do not Iron

- Do not Bleach

- Do not Dryclean

silicone rubber heat transfer

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.